: Manufacturer instructions specify that every time hubs are disassembled, the parts supplied in this service kit (89-10580) should be used for re-installation to ensure a proper seal and function.
: Cover screws should be tightened to 26–35 in. lb. (approximately 30–40 kgf.cm) during reassembly. Where to Buy
: Provides Superwinch 89-10580 Winch Replacement Parts. Shop for SUPERWINCH Winch Parts and Components :: Superwinch wheel Repair Kits 89 10580
: Generally ranges between $8.99 and $12.74 . Compatible Applications This repair kit is primarily used for:
: Superwinch free-wheeling hubs are permanently lubricated. If you disassemble them for inspection, do not use grease . Instead, lubricate parts lightly with SAE 30 oil . : Manufacturer instructions specify that every time hubs
: Specifically compatible with models like the S3000, S4000, and S5000.
: Always use the special snap ring provided in the Superwinch kit on the axle shaft rather than reusing the original snap ring. (approximately 30–40 kgf
: Used during vehicle maintenance to replace internal seals or worn components when hubs are disassembled. Critical Maintenance & Installation Guidelines
