: Test that the system successfully disables crane functions during an overload condition.
Below is a guide for the assembly and maintenance procedures typically associated with these technical standards. 🏗️ PAT/Hirschmann Crane System Guide n_031.mp4
Before completing the assembly, verify these digital inputs: : Test that the system successfully disables crane
: If replacing the system chip, ensure the notch faces the correct direction to avoid frying the board. n_031.mp4
: Set the boom between 0 and 5 degrees. Use an inclinometer to verify the actual physical angle.
: Fully retract the boom. Turn the potentiometer counter-clockwise until it stops to reset the "zero" point.
