: Plug in your Arduino. Windows should recognize it as a "COM Port" in the Device Manager. 3. Download and Install CH340 Drivers (for Clones)
: Usually use the Atmel or FTDI chip. Drivers for these are included with the Arduino IDE . draivera dlia arduino skachat
: Most modern macOS and Linux versions have these drivers pre-installed, but you may need to grant "dialout" permissions on Linux using sudo usermod -a -G dialout $USER . : Plug in your Arduino
To get your Arduino board working with your computer, you need to install the correct drivers so the software can "talk" to the hardware. Most modern Arduino boards use the or FTDI chips, while official boards often use the Arduino IDE 's built-in drivers. 1. Identify Your Arduino Chip Download and Install CH340 Drivers (for Clones) :
: Restart your computer if prompted. Once reconnected, the board should appear in the Arduino IDE under Tools > Port . 4. Troubleshooting Tips
Before downloading, look at the small rectangular chip near the USB port on your board:
: These almost always use the CH340G chip. You will need to download this driver separately. 2. Download and Install Official Drivers